FLUXOFIL 45 is a seamless copper coated basic flux cored wire for welding high-strength fine grain structural steels. Quiet and smooth running with low spatter loss and easy slag removal producing uniform and smooth beads which are free from porosity. The mechanical properties of the weld depend on the cooling conditions and are influenced by the heat input and interpass temperature..
Classification | |
---|---|
EN ISO 18276-A: | T89 4 Mn2Ni1CrMo B M 2 H5 |
AWS A5.29: | E120T5-GM H4 |
C | Mn | Si | P | S | Cr | Ni | Mo | Nb | V | N | Cu | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wire | 0.09 | 2.0 | 0.50 | 0.01 | 0.01 | 1.0 | 1.8 | 0.4 | - | - | - | - |
Heat Treatment | Yield Strength N/mm2 |
Tensile Strength N/mm2 |
Elongation A5 (%) |
Impact Energy ISO - V (J) | Hardness | ||
---|---|---|---|---|---|---|---|
As Welded | > 890 | 940-1180 | > 15 | > 47 (-40°C) | - |
Gas test: 82% Ar + 18% CO2
Shielding Gas: EN ISO 14175: M21
Materials: S890
Storage: Keep dry and avoid condensation
Current condition: DC+
SIA “ELKO G.C.”
Mūrmuižas iela 11, Valmiera, LV 4202
Phone 64222944 Fax 64221559
Pērnavas iela 86, Rīga, Phone/fax 67299331
e-mail: [email protected]