Magmaweld EH-360B - thick basic-covered electrode for depositing tough and wear resisting overlays on structural members subjected to severe wear. It is particularly resistant to high meta-to-metal wear, moderate impact and abrasion. The weld metal has sufficient red hardness up to +600°C. It can be machined only by grinding. Suitable hardfacing applications where wear resistance at higher temperatures is a prime concern, as in hot cut offs, dies for pressure castings, rolls, crushers excavator parts, bucket edges and bucket teeth, drilling bits, coal planes, conveyor screws. Multi-layers deposits will be free of cracks, even without depositing intermediate buffer layers. Only in case of very crack sensitive base metals, a tough buffer layer, made with ESB 40 or EI 307B electrodes, is required. Preferred to use with DC, electrode in positive (+) pole and also possible to use with AC.
Classification | |
---|---|
EN 14700 | E Fe8 |
DIN 8555: | E 6-UM-60 (65W) T |
C | Si | Mn | Cr | V | Fe |
---|---|---|---|---|---|
0.40 | 0.50 | 0.30 | 7.00 | 0.50 | Rest |
Heat Treatment | Hardness (HRC) |
---|---|
As Welded | 59 |
It has to be dried at 350°C for 2 hours.
It should be stored in a dry room (relative humidity < 50%, room temperature > 20°C) on wooden pallets
It can be dried maximum 5 times.
SIA “ELKO G.C.”
Mūrmuižas iela 11, Valmiera, LV 4202
Phone 64222944 Fax 64221559
Pērnavas iela 86, Rīga, Phone/fax 67299331
e-mail: [email protected]