Inverter AC/DC for TIG HF welding and MMA welding.
Enables excellent results either in AC welding mode (for aluminium and light alloys) or DC welding mode (for steel, stainless steel, zinc, brass, copper).
Available TIG Pulsed mode to reduce welding piece distortion and enable thin to thick plate welding.
Balance adjustment for penetration or cleaning effect.
High frequency or contact TIG arc ignition (Liftig).
Also optimized for MMA welding of all types of electrodes.
Standard remote control, pedal, torch with poteciometer and wireless remote control with all welding parameters adjustable (soon available) as option.
- Pulsed current to prevent welding piece distortion
- Presetting and real time welding current on digital display
- Inbuilt overvoltage protection for safe connection to generators
- Overheat, overvoltage and overload protections to ensure maximum reliability
- Up slope welding current time adjustable for a smooth arc ignition
- Down slope welding current time for crater treatment
- Adjustable pre gas time to protect welding pool
- Adjustable post gas time to protect welding seam
- 2 or 4 times working modes selection
- 9 welding programs to store and repeat your welding programs
Technical Properties | TP 202 AC/DC |
Input Voltage | 1x230 V (+/- 10%) |
Frequency | 50/60 Hz |
Max. primary current MMA/TIG | 36/36 A |
Max. input power MMA/TIG | 8.3/8.3 kVA |
Fuse | 25 A |
No load voltage | 70 V |
Welding Current Range | 10 - 200 A |
Duty cycle t=40ºC 10 min (35%) | 200 A |
Duty cycle t=40ºC 10 min (60%) | 150 A |
Duty cycle t=40ºC 10 min (100%) | 120 A |
Electrode | 2.00 - 5.00 mm |
Protection degree | IP 23S |
Insulating class | F |
Weight | 20 kg |
Dimensions | 460x240x450 cm |
SIA “ELKO G.C.”
Mūrmuižas iela 11, Valmiera, LV 4202
Phone 64222944 Fax 64221559
Pērnavas iela 86, Rīga, Phone/fax 67299331
e-mail: [email protected]