M 26 diam. 2.0mm 4 kg
Especially suitable for welding in sheets thinner then 5 mm, galvanized sheets and tubes, primer painted, painted and slightly rusty steels and in production of tanks and boilers, tube installations. Very easily operated in positional welding, including vertically-down. Good gap-bridging. Smooth arc, well suited for tack-welding due to its easy arc striking and re-striking properties. Possible to use equally well both with AC and DC. Welds are smooth, slightly concave and blending into base metal without undercutting. Slag is self-releasing.
| Classification | |
|---|---|
| AWS A5.1: | E6013 |
| EN ISO 2560-A: | E 38 0 RC 11 |
Typical Chemical Analysis of All-Weld Metal (%)
| C | Si | Mn |
|---|---|---|
| 0.08 | 0.45 | 0.60 |
Typical Mechanical Properties of All-Weld Metal
| Heat Treatment | Yield Strength N/mm2 | Tensile trength N/mm2 | Elongation A5 (%) | Impact Energy ISO - V (J) 0 °C | |
|---|---|---|---|---|---|
| As Welded | 480 | 530 | 27 | 55 | |
Materials
| EN | DIN |
|---|---|
| S185 - S355J0 | St 33- St 52.3 |
| P235GH, P265GH | H I, H II |
| P295GH | 17Mn4 |
| P235TR2 - P355T2 | St37.4 - St 52.4 |
| P235G1TH, P255G1TH | StE 35.8 - StE 45.8 |
| L210 - L360NB | StE 210.7 - StE 360.7 |
| S255N - S355N | StE 255- StE 355 |
| GE 200, GE 240 | GS 38, GS 45 |
| AH 32, EH 36 | |
| A, B, D |
Storage and redrying information
Generally not required. If required, redry for 1 hour at 110°C.
It should be stored in a dry room (relative humidity < 50%, room temperature > 20°C) on wooden pallets.
Current polarity: DC- or ~
SIA “ELKO G.C.”
Mūrmuižas iela 11, Valmiera, LV 4202
Phone 64222944 Fax 64221559
Pērnavas iela 86, Rīga, Phone/fax 67299331
e-mail: [email protected]